Laboratory Tube Furnace

Application
Tube Furnace is designed for R&D labs, Educational institutions, Medicine and Industry, Chemical Industries, Ceramics Industry, Biomedical Industry, Pharma Industry, Thermal Process Technology, Advanced Materials for following applications- Purification, Coating, Drying, Hardening or Ageing of samples, Annealing, Brazing, Calcination, Degassing, Sintering, Tempering, Thermocouple calibration, Testing of fuel cells, Catalyst research, Inorganic and Organic purication, Coating etc.

Features

• Maximum operating temperature range up to 1800°C.
• Available in, Horizontal operation, Vertical operation, universal operation.
• Compact design for minimum space requirement.
• Rugged and durable Construction.
• Outer casing is made up thick mild steel with duly powder coated or thick buffed stainless steel, gives long service life with extremely resistant.
• Multilayer insulation with vacuum formed ceramic fibre or refractory bricks with low thermal mass.
• Alumina/Quartz/Metal tube with two fibre plugs included.
• Inner diameter of the tube from 20 mm to 150 mm.
• Heated Length from 100 mm to 1000 mm.
• Furnace design with powerful heating elements i.e. FeCrAl, SiC and MoSi2 in all sides of the work tube providing fast heating rate.
• Fast heat up and cool down rates.
• Temperature uniformity +/- 5°C.
• Temperature control with PID controllers.
• Power control with solid state relays or Thyristor units for very precise temperature Control, wear-free and noiseless.
• High mechanical durability, short heating cycle and low power consumption.

Optional Features

• Multi-zone temperature control.
• Touchscreen temperature controller.
• Over Temperature Limiter.
• Vacuum pump with fittings.
• Gas and Vacuum Compatible Flanges, Water cooled flanges with chiller.
• Door flanges with hinges.
• Gas mixing system.
• Digital/Analog flow meters.
• Port for additional thermocouple on the flange.
• Process observation window on flange.
• Buzzer, Digital timer, Emergency shut down.
• Data Recorder.
• RS232/RS485/USB interface.
• Calibration of temperature measurement systems.
• Table/Stand for supporting the systems.
• Data Acquisition System (DAS) through software.
• UPS Systems.
• Customization as per user requirement